2005 Trailer mounted Sludge Mate 15 cubic Yard
Model SM-15-O-TM
Straight tongue, 10'-9' dump bed
Size 8'-6" wide x 18'-5" long x 9'-5 1/2" high
(including container)
Dump capacity including weight of body 24,000 lbs.
Single cylinder scissors type hoist-LB645
12VDC battery powered with charging lead
Hydraulic pump 1gpm 3000 psi with 13-qt reservoir
Remote control station on a 25' lead mounted on door
Latch side at front of box
Standard Highway lighting
7 round pin electrical lead
10,000 lbs. tandem dual suspension axles
Rocker slippers springs
16.5 x 16 ply radial tires
Single 8,000-lb. landing gear
Breakaway switch
All wheel electric brakes
3" 45,000 lb. pintle ring.
Side to side rolling trap and trap rolling hardware
PM500A Poly Mate Plymer Mixing & injection Unit
200 gallon tank with 3/4 h.p. gear driven electric agitator
110 volt single phase
1/2 H.P. D.C. motor with progressive cavity pump & D.C. controller
Patented Model MM-400 Mix-Mate maniforld with 2" inlet
and 2" outlet for sludge flow 50-100 gpm.
Flow meter for dilute polymer metering
Control box with on/off switch
All components less tank are skid mounted, wired, piped &
manifold for installation on site
Steel parts are sandblasted, coated with eposy primer & upper
coated with industrial enamel.
For use with liquid polymer only.
Delivers up to 4gpm of dilute polymer.
Standard units are wired for 110 volt single phase
Tank with agitator dimensions 24" x 61"
Weight 130 lbs.
Skid mounted unit dimensions 36" x 18" x 36"
Weight 240 lbs.
|
